Memory Mode; Load Mode - G.T.Power C6D Pro Manual

This charger can save setting data of each program, it can save 5 groups data for each kind
of battery, including the cells of the battery, setting charge current and so on. Users do not
need to set the data again when they use the batteries which have been memory. It is easier
and more convenient to use.
PROGRAM SELECT
SAVE DATA
SAVE [ ] LiPo
0.0V 0mAh
LiPo
0.0A 0.0V(0S)
PROGRAM SELECT
LOAD DATA
LOAD [1] LiPo
11.1V 10mAh
LiPo STORE
3.0A 11.1V(3S)
Battery Check......
Please Wait......
14、 Memory Mode
Select memory mode, press Start to start set.
Press STATUS to choose the number.
Press START to choose battery type. Short press START till the
content ickering, through press DEC/INC to choose battery
type, short press STATUS to set cell counts, charge current,
discharge current.
After nished, long press START to save settings.
15、 Load Mode
This program aims to retrieve the data stored in the "Save
Data"program
Press "Start /Enter" till contents ickering, then press INC/DEC
to select number,press and hold "Start Enter" for 3 seconds to
start program.
Select the data you wanted to retrieve back and download.
Long press ENTER to start program, press STOP to stop
program.
32