Warning And Error Messages - G.T.Power C6D Pro Manual

It combines a variety of protection functions and monitoring systems to identify its
electronic functions and status. Screen will automatically display the error reason with a
prompt tone if any error happens.
1.{" REVERSE POLARITY "}
Battery output Polarity connection wrong;
2.{" CONNECTION BREAK "}
Interruption of battery and output, or the
charger wire is not connected well when
operate the charge or dischargeoutput.
3.{" OUTPUT SHORT CIRCUIT "}
Short-circuit of the output terminal. Please
check the chargerwire
4.{" INPUT VOLTAGE ERROR "}
The voltage of the input terminal is lower or
higher than the settinglimit
5.{" BATTERY LOW VOLTAGE "}
The voltage is lower than which is set.
Please checkthe number of cells in the
battery pack.
18、 Warning and error messages
36
6.{" BATTERY HIGH VOLTAGE "}
The voltage is higher than which is set.
Pleasecheck the number of cells in the
battery pack.
7.{" CELL LOW VOLTAGE "}
Voltage of one cell in the battery pack is too
low, please check the voltage of each cell.
8.{" CELL HIGH VOLTAGE "}
Voltage of one cell in the battery pack is too
high;please check the voltage of each cell
9.{" CELL CONNECT ERROR "}
Wrong connection of the connector
detected; please check the connector and
cable.
10.{" CHARGER OVERHEATING "}
The internal temperature of the unit goes
too high.Cool down the unit