Dji Phantom Series Battery Charge Program; Cell Meter Test Program - G.T.Power C6D Pro Manual

10、 DJI Phantom series battery charge program
DJI Phantom
Battery Mode
10.1 DJI Phantom 3 battery charge program
DJI Phantom 3
2.1A
10.2 DJI Phantom 2 battery charge program
DJI Phantom 2
2.1A
Dron 0.4A 7.82V
CHG 000:06 00000
This charger with built-in high-bit micro-processor, can be used as a cell meter.It can show
the voltage of each cells, the total battery pack voltage and the highest/ lowest voltage.
USER PROGRAM
Cell Meter
C6DPRO Charger is the intelligent multi-functional charger. It
can charge many di erent battery types and can also charge
DJI batteries.
The battery's capacity of Phantom 3 professional and
Phantom 3 is 4480mAh and the standard voltage is 15.2V.
It is easy to operate the charger to charge the DJI batteries.
Connect the battery and press Start/Enter over 3 seconds to
start the program and press Batt type/Stop to stop the
charge.
The battery's capacity of Phantom 2and Phantom 2 vision
and Phantom 2 Vision+ is 5200mAh and the standard voltage
is 11.1V.
Connect the battery and choose the charge program of
Phantom 2, then press Start/Enter over 3 seconds to start the
program and press Batt type/Stop to stop the charge.

11. Cell Meter test program

Choose the cell meter program interface, press START to
enter, will show 1-6 cells voltage.
28