Charging Current Setting; Lithium Battery (Lilon/Lipo/Life/Lihv) Program - G.T.Power C6D Pro Manual

You have to know the battery allowable maximum charging current before
charging.Charging current exceeds the allowable maximum charging current may cause
damage to battery and it is possible to lead a re and explosion of battery when charging.
We usually use C value to mark battery charging/discharging capability.The battery
allowable maximum charging current is calculated by multiply C value by battery capacity .
For example, if battery is 1000mAh, 5C, then the allowable maximum charging current is
1000*5=5000mA, that is the battery maximum allowable charging current is 5A.
To Lithium batteries, if you can't con rm battery's C value, for your safety, please set
charging current no more than 1C.
The relationship between C value and charging time is, charging time≥60minites/C value,
for example, charging with 1C, charging nish time need 60-70 minutes. This time may be
extended due to di erent battery performance.
7. Lithium battery(LiIon/LiPo/LiFe/LiHv)program
These program suit for Lilo/LiPo/LiFe/LiHv battery pack charge/discharge. You have to
choose the right program according to di erent lithium battery performance.
Lithium
Battery Mode

6. Charging current setting

Select lithium battery charge mode, short press enter key to
the program.
Short press 'Start/Enter' key to select battery types （ LiPo、
LiFe、 Lilo、 LiHv） and program modes, such as balance
charge,discharge, FB-DIS, storage, repair, normal charge,then,
you can through press INC and DEC key to change the
current value （ 0.1-12A） , discharge current value
(0.1-3A),FB-DIS discharge current value(0.1-12A).The same
operation method to set battery voltage and cells(1-6S).
For your attention,you need to connect the battery to the
charger's output plug as well as the balance port correctly
when charging.
1: