QMS 2060 WX Print User Manual page 93

Setting the Subnet Mask
The Subnet Mask menu allows you to set the printer's subnet mask.
The address is in the format xxx.xxx.xxx.xxx.
Menu Subnet mask
Choices Each xxx.xxx.xxx.xxx triplet can have a value of 001–
254.
Default 000.000.000.000
n If subnets are not used with your network, the sub-
Notes
n Once you save your changes to this menu, the
n The address must consist only of numbers and
n Any xxx value between 1 and 9 must begin with 00
n Any xxx value between 10 and 99 must begin with
Control Panel
net mask should remain 000.000.000.000. (Check
with your network administrator.) This allows the
interface to provide automatic sensing of gateways.
If you identify a subnet mask, this automatic sens-
ing is disabled.
printer automatically reboots.
periods. Selecting a letter or another symbol
results in an error message.
(for example, 1 is entered as 001, and 9 is entered
as 009).
0 (for example, 10 is entered as 010, and 99 is
entered as 099).
Printer Configuration
3-11