QMS 2060 WX Print User Manual page 189

These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
» Note: A shielded cable is required to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules.
Canadian Users Notice
This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio Interfer-
ence Regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques (de la
classe A) prescrites dans le Règlement sur le brouillage radioélec-
trique édicté par le ministère des Communications du Canada.
Caution: Any modifications or changes to this product not expressly
s
approved in writing by the manufacturer responsible for compliance to
Federal Regulations could void the user's authority to operate this
product within the Laws and Regulations of the Federal
Communications Commission.
M WARNING! To prevent electrical shock, do not remove any covers
from your printer unless you are experienced in working with circuit
boards and are following instructions for procedures described in
QMS documentation.
ACHTUNG! Um elektrische Kurtzschlüsse zu vermeiden, entfernen
Sie keine Gehaüseteile von Ihrem Drucker, wenn Sie keine
Erfahrungen im Umgang mit elektrischen Bauteilen haben. Befolgen
Sie die in der QMS Dokumentation beschriebenen Hinweise.
Technical Specifications
Regulatory
B-11