Display The Status Of All Programmed Points; View The History Buffer; Send The History Buffer To The Crt-2; View The Alarm History Buffer - Notifier NFS-640 Operation Manual

Using the CRT-2 for Read Status
NFS-640 Operations Manual P/N 51334:B 10/03/2003
Technical Manuals Online! - http://www.tech-man.com

Display the Status of all Programmed Points

From the "Read Status" menu, select option 3 - Read All Points. The CRT-2 displays a list of the status
of all addressable detectors, modules, panel circuits, system parameters and software zones:
3W
Press
NORMAL SMOKE(PHOTO) DETECTOR ADDR 1D001 Z03 Z Z Z Z 000%A5 PA:0 ** L1D001
NORMAL SMOKE(ION) DETECTOR ADDR 1D002 Z02 Z Z Z Z 00%A5 PA:0 ** L1D002
NORMAL HEAT(ANALOG) DETECTOR ADDR 1D003 Z01 Z Z Z Z 000%A5 PA:0 * L1D003
OFF CONTROL MODULE ADDRESS 1M049 Z00 Z Z Z Z
NORMAL MONITOR MODULE ADDRESS 1M050 Z06 Z Z Z Z

View the History Buffer

From the "Read Status" menu select option 4 - History-Step. This option lets you step through the
History buffer one event at a time:
4W
Press
EVENT History Start
The first line that appears displays the number of events in the History buffer. Step through the History
buffer one event at a time by pressing the Next F5 or Prior F6 function keys.

Send the History Buffer to the CRT-2

From the "Read Status" menu select option 5 - History-All. This option sends the entire History buffer
to the CRT-2, from most recent event to oldest event:
5W
Press
**************************
SYSTEM RESET
ALARM SILENCED
ACKNOWLEDGE
ALARM: PULL STATION MODULE ADDRESS 1D151 Zone 06
**************************
The semicolon, a control character in networking applications, separates the hour and minute of events
displayed from history. If events display as they occur, a colon separates the hour and minute.

View the Alarm History Buffer

From the "Read Status" menu select option 6 -Alarm-History:Step. This option lets you step through the
Alarm History buffer one event at a time:
6W
Press
**************************
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: SMOKE (ION) DETECTOR ADDR 1D129
The first line that appears displays the number of events in the History buffer. Step through the Alarm
History buffer one event at a time by pressing the Next F5 or Prior F6 function keys.
firealarmresources.com
Appendix C: Remote Terminal Access
Events in HIST:005
EVENT HISTORY **************************************
System Normal 04;15P Wed 07/07/01
PRINT END *****************************************
ALARM HISTORY START *************************************
IS* L1M049
L1M050
Semicolon
04;15P Wed 07/07/01
04;15P Wed 07/07/01
04;14P Wed 07/07/01
04;14P 07/07/01 M151
10:21A 050501 1M065
10:19A 050501 1M065
03:20P 050401 1M065
03:20P 050401 1D129
73