System Status Led Indicators; System Trouble; Fire Alarm - Notifier AFP-100 Instruction Manual

System Status LED Indicators

AFP-100/AFP-100E Instruction PN 51010:C1 02/06/2002
Technical Manuals Online! - http://www.tech-man.com
The control panel has five System Status LED Indicators on the front of the control panel as shown
below:
System Status
LED Indicators
Figure 22 System Status LED Indicators Keys
AC Power
This is a green LED which illuminates if AC power is applied to the control panel.

Fire Alarm

This is a red LED that flashes when one or more alarms occur. The
when you press the
ACKNOWLEDGE
off when you press the
SYSTEM RESET
Supervisory
This is a yellow LED that flashes when one or more supervisory conditions occur, such as a sprinkler
valve tamper condition. It illuminates steady when you press the
key. The
ALARM SILENCE SUPERVISORY
Alarm Silence
This is a yellow LED that turns on after the
condition). It turns off when you press the

System Trouble

This is a yellow LED that flashes when one or more trouble conditions occur. It stays on steady when
the / key or
ACKNOWLEDGE STEP
conditions are cleared. This LED will also illuminate if the microprocessor watchdog circuit is
activated.
/ key or the
STEP ALARM SILENCE
key.
LED turns off when you press the
ALARM SILENCE
key or the
DRILL
key is pressed. The LED turns off when all trouble
ALARM SILENCE
LED illuminates steady
FIRE ALARM
key. The
FIRE ALARM
/ key or the
ACKNOWLEDGE STEP
SYSTEM RESET
key is pressed (preceded by a fire alarm
key.
SYSTEM RESET
LED turns
key.
59