Display; Special Messages; No Response From Cpu - Notifier AFP-2800 Operator's Manual

Page 68

Display

The LCD Display is made up of 4 lines of 20 characters each. Events are displayed as:
Date Time
Point Description
Point / Zone Number
Total Alarms
In the above example, a fault occurred on the 10
occurred in the East Wing on point number 1.1.Z3. There are 0 alarms, 1 faults, and 0 isolates on the system.
10 SEPT 12:37
WEST WING
1.1.Z7 ALARM
A=2 F=2
S M
PECIAL ESSAGES
ALL SYSTEMS NORMAL
COMMS FAILURE *

NO RESPONSE FROM CPU

© N I P
OTIFIER NERTIA TY
www.PDF-Zoo.com
10 SEPT 12:34
EAST WING
1.2.Z6
A=0 F=1
Total Faults
th
1/2
In this example, an alarm occurred on the 10
at 12:37pm. It is the first of two alarms and occurred in the
West Wing on point number 1.1.Z7. There are 2 alarms, 2
faults, and 0 isolates on the system.
I=0
The system is 100% normal with no alarms, faults, or
isolates.
This messages flashes and appears when the LCD80 has not
been polled by the CPU in over 10 seconds
The LCD80 is being polled by the CPU, but the CPU has not
responded to an LCD80 request in over 20 seconds
L , 2001
TD
firealarmresources.com
AFP-2800 - Fire Indicator Panel – Appendix
Event No / Total Number of Events
1/1
Point Status
FAULT
I=0
Total Isolates
September at 12:34pm. It is the first of only one fault and
th
of September
. .
WWW INERTIA COM
.
AU