Lubrication - Woodstock SHOP FOX M1118 Owner's Manual

Model M1118 (For Machines Mfd. Since 09/21)

Lubrication

Clamping.Leaf.Pivots
Clamping Leaf
Oil Type .......................................ISO 32 Equivalent
Oil Hole (1 of 2)
Oil Amount ............................................ 1–2 Drops
Lubrication Frequency .................. Daily, or As Needed
Use an oil can to add lubricant to the hole shown in
Figure 18 (one on each side of the brake), then raise and
lower the clamping leaf several times to distribute the
lubricant.
Bending.Leaf.Pivots
Oil Type .......................................ISO 32 Equivalent Bending Leaf Clamping Leaf
Oil Amount ............................................ 1–2 Drops Oil Holes Guide Pin Slot
(1 of 2) (1 of 2)
Lubrication Frequency .................. Daily, or As Needed
Figure.18. . Lubrication points.
Use an oil can to add lubricant to the hole shown in
Figure 18 (one on each side of the brake), then raise and
lower the bending leaf several times to distribute the
lubricant.
Clamping.Leaf.Guide.Pin.Slots
Oil Type ......................................NLGI#2 Equivalent
Oil Amount ............................................ Thin Coat
Lubrication Frequency ................Weekly, or As Needed
Apply a thin coat of grease to the guide pin slots shown in
Figure.18.
-23-