Maintenance & Care - Hyundai HDBT52-A Original Instructions Manual

side. You will be hit by some debris if you scythe in both directions.
Cut only with the side of the blade that the debris is moving away from you.
If kickback occurs, the blade may be dull, or the material so thick and hard that you should use other tool
instead of this machine.
Do not force the blade to cut. Do not change the angle of cut after into the wood. Avoid using any pressure or
leverage which could cause the blade to bind or crack.
6. MAINTENANCE & CARE
Before any maintenance work, the machine must be switched off and completely cooled.
Maintenance shall be provided regularly and must be done according to the instructions provided in
this instruction manual. A clean, well-maintained machine increases its lifetime and efficiency.
Improper maintenance can cause damage, accidents and render the tool inoperable in the short
term.
Any other maintenance, modification or repair must be carried out by a qualified professional.
Do not immerse the tool in water or any other liquid.
a. Air filter
Check the air filter as often as necessary to maintain in a clean condition. Light surface dust can readily be
removed by tapping the filter. Heavy deposits should be washed out in suitable solvent. To clean the filter, remove
filter cover by loosening air filter cover knob.
b. Adjusting the carburettor
Do not adjust carburettor unless necessary. If you have trouble with the carburettor, see your dealer. Improper
adjustment may cause engine damage and void warranty.
c. Fuel filter