Fan - Hunter Concert Breeze 45049-01 Owners And Installation Manual

Installing the Glass Bowl
8-1. Remove protective foam ring
from threaded portion of light
kit/speaker assembly.
8-2. Install B10 candelabra bulbs
(40 Watt Maximum) into the
sockets.
8-3. Place the glass bowl over the
light kit/speaker assembly, ensuring the
threaded portion of the light kit
assembly comes out of the bottom of
the glass bowl.
8-4. Place the finial over the
threaded portion of the light
kit/speaker assembly and twist
it as shown to tighten it against
the glass bowl.
8-5. Thread the fan pull chain
through the pull chain guide.
Note: In compliance with US federal
energy regulations, this
ceiling fan contains a device
that restricts the light kit to
a maximum of 190 Watts.
Exceeding that limit or the
marked limit on this product
may result in fire hazard or
improper operation.
8 •Glass Installation
Light Bulbs
(B10 Candelabra
Base 40 Watt
Maximum)
Finial
14
45049-01 • 07/13/09 • Hunter Fan Company
Threaded
Portion of
Light Kit
Assembly
Glass Bowl
Steps 8-2 - 8-4
Breakaway
Connector
Fan Pull Chain
Pull Chain
Guide
Step 8-5