12 • Changing the channel on the Maestro™ and the Fan
The Maestro™ transmitter and the fan must be on the
NOTE:
same channel to transmit and receive properly.
12-1. To change the channel on the Maestro™, slide the channel
selection switch on the lower right corner of the transmitter.
12-2. To change the channel on the fan press the
remote.
12-3 The green/red LED indicators on the bottom of the fan display
the channel the fan is tuned to. Green LEDs indicate a good
signal and red LEDs indicate no signal.
LED Indicators
Channel 1
Channel 2
Channel 3
Channel 4
button on the
19
45049-01 • 07/13/09 • Hunter Fan Company
Maestro™
Channel
Selection
Switch