Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
Grant Park
__________________________________________
Model Name
21711
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45046-01
20090817
©2009 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 45046-01
Summary of Contents for Hunter 45046-01
- Page 1 Grant Park __________________________________________ Model Name 21711 __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45046-01 20090817 ©2009 Hunter Fan Co. Type 2 Models Type 2 Models Type 2 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
4 •Wiring the Fan . . . . . . . . . . . . . . . . . . - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angled mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. 3” Screw 45046-01 • 08/17/09 • Hunter Fan Company Flat Washer Ceiling Peak Large Opening... -
Page 6: Assembling And Hanging The Fan
3-1 – 3-3. For low profile mounting (ceilings less than 8 feet high), go to steps 3-6 – 3-9 on the next page. 3-1. To assemble fan to hang down from a flat or angled ceiling, place the canopy and canopy trim ring around the adapter so that they rest on the fan assembly. - Page 7 3-9. Align the screw holes in the washer with the holes in the adapter. Assemble securely with three #8-32 x 3/4” screws. 3-10. Raise the fan and place the hook on the hanger bracket through the round hole in the rim of the canopy.
-
Page 8: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45046-01 • 08/17/09 • Hunter Fan Company 4 •Wiring the Fan Wire... -
Page 9: Installing The Canopy And Canopy
Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-5 45046-01 • 08/17/09 • Hunter Fan Company Steps 5-1 – 5-2 Canopy Step 5-4 Canopy Screw... -
Page 10: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 11: Completing Your Installation With Or Without A Bowl Light Fixture
7 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. - Page 12 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 45046-01 • 08/17/09 • Hunter Fan Company Steps 7-6 – 7-7 Lower Switch Housing...
- Page 13 (You may find the plastic breakaway connector on the end of the extra chain.) 7-10. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
- Page 14 7-22. Once you have uninstalled the light fixture, continue with step 7-6. Male Dummy Terminal Female Dummy Terminal 45046-01 • 08/17/09 • Hunter Fan Company Lower Switch Threaded Rod Steps 7-17 – 7-19 Plug Button Housing Step 7-21...
-
Page 15: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off. • Pull the chain slowly to change settings. -
Page 16: Troubleshooting
1. Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan. 45046-01 • 08/17/09 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call...
Need help?
Do you have a question about the 45046-01 and is the answer not in the manual?
Questions and answers