Light/Speaker Assembly Installation - Hunter Concert Breeze 45049-01 Owners And Installation Manual

7-1. To attach the upper switch housing, partially install two housing
assembly screws into the switch housing mounting plate.
7-2. Feed the upper plug connector through the center opening of the
housing.
7-3. Align the keyhole slots in the housing with the housing assembly
screws.
7-4. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining screw into the housing. Tighten all three
screws firmly.
CAUTION: Make sure the upper switch housing is securely attached
to the switch housing mounting plate. Failure to properly attach and
tighten all three assembly screws could result in the switch housing
fixture falling.
7 • Light/Speaker Assembly Installation
11
45049-01 • 07/13/09 • Hunter Fan Company
Steps 7-1 – 7-4
Housing
Upper
Assembly
Switch
Screw
Housing