Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45003-01
20090702
©2009 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 45003-01
Summary of Contents for Hunter 45003-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45003-01 20090702 ©2009 Hunter Fan Co. Type 3 Models Type 3 Models Type 3 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Screw 45003-01 • 07/02/2009 • Hunter Fan Company Isolator Hanger Bracket Ceiling Peak Ceiling Peak... -
Page 6: Assembling And Hanging The Fan
3 • Assembling and Hanging the Fan 3-1. To assemble fan to hang down from a flat or angled ceiling, place the canopy and canopy trim ring around the adapter so that they rest on the fan assembly. 3-2. Feed the wires from the fan through the downrod. -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45003-01 • 07/02/2009 • Hunter Fan Company 4 •Wiring the Fan Wire... -
Page 8: Installing The Canopy And Canopy Trim Ring
Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-5 45003-01 • 07/02/2009 • Hunter Fan Company Steps 5-1 – 5-2 Canopy Step 5-4 Canopy Screw... -
Page 9: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 10: Completing Your Installation With A Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. - Page 11 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. 45003-01 • 07/02/2009 • Hunter Fan Company Steps 7-5 – 7-6 Lower Switch Housing...
- Page 12 7-9. Place the finial over the threaded portion of the heater vent and twist it as shown to tighten it against the glass bowl. 45003-01 • 07/02/2009 • Hunter Fan Company Switch Housing Screws (3)
-
Page 13: Assembling The Remote Control And Mounting The Cradle
Use the inner mounting holes. CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. - Page 14 1. At the circuit breaker or fuse box, turn the power off for the fan you want to change. Do not turn the power off at the circuit breaker for the previously installed fan, as you may inadvertently change the DIP switch code settings for it as well.
-
Page 15: Operating And Cleaning Your Ceiling Fan
9 • Operating and Cleaning Your Ceiling Fan Fan Operation: To start the fan, press the speed button on the remote at the level you desire: • 3 for high • 2 for medium • 1 for low To turn off the fan, press the “0” button on the remote. -
Page 16: Troubleshooting
Problem: If the light on this fan shuts off suddenly. 1. Turn the power to the fan off at the wall switch. Wait 30 seconds, then resume power to the fan. 45003-01 • 07/02/2009 • Hunter Fan Company 10 •...