Hunter Concert Breeze 45049-01 Owners And Installation Manual page 12

7 • Light/Speaker Assembly Installation (Continued)
7-5. Feed the two wires from the light kit up through the center hole
in the lower switch housing.
7-6. Insert the threaded rod from the light kit/speaker assembly into
the center hole in the lower switch housing.
7-7. Align the screw holes in the bottom of the lower switch housing
with the screw holes on top of the light kit/speaker assembly,
making sure the pull chain lines up with the chain guide.
7-8. Attach the light kit/speaker assembly to the lower switch housing
by installing the two #6-32 round head screws .
7-9. Install the nut and washer onto the threaded rod from the light
kit/speaker assembly.
7-10. Remove the wire connectors from the two wires in the switch
housing labeled "Connect Light Here" or "For Light Use. "
Steps 7-8 – 7-9
12
45049-01 • 07/13/09 • Hunter Fan Company
Lower
Switch
Housing
Threaded Rod
Steps 7-5 - 7-6
Note: Align the fan pull chain
with the chain guide.
Wires
Light Kit/
Speaker