Cj1W-Pdc15 - Omron CJ Series Operation Manual

3
Create user-defined variables in Sysmac Studio's variable table by using the structures defined
for Expansion Setting Parameters of each Unit. Assign to these variables, via AT specification,
the addresses of memory used for CJ-series Unit for Expansion Setting Parameters specified in
2.
The names of variables used in the user program are listed below.
Example:
When a variable with the name "aaaa" is created by using the structure for CJ1W-PDC15 Expansion
Setting Parameters _sCJPDC15_Ex_Param.
Variable (name)
aaaa
aaaa.ExtIOArea
aaaa.ExtIOAdr
aaaa.Ch1_GainAdjFVCfg
aaaa.Ch1_ZeroAdjFVCfg
aaaa.Ch1_AdjPrd
aaaa.Ch1_AdjNoticeDay
aaaa.Ch1_TopVlyHystrs
aaaa.Ch1_IntgUnit
aaaa.Ch2_GainAdjFVCfg
aaaa.Ch2_ZeroAdjFVCfg
aaaa.Ch2_AdjPrd
aaaa.Ch2_AdjNoticeDay
aaaa.Ch2_TopVlyHystrs
aaaa.Ch2_IntgUnit
In the explanations from here on, the variable name portion "aaaa." attached to the structure is omit-
ted such as with Ch1_GainAdjFVCfg.
For details on operations to create user-defined variables, refer to the Sysmac Studio Version 1
Operation Manual (Cat. No. W504).
1-6-2

CJ1W-PDC15

These Units exchange data by using the CPU unit I/O port and memory used for CJ-series Unit.
• Operation Data
• Expansion Operation Data
• Setting Parameter
• Expansion Setting Parameter
AT specification of variables accessing these parameters/data is determined with the following.
CJ-series Analog I/O Units Operation Manual for NJ-series CPU Unit(W498)
Data type
_sCJPDC15 CJ1W-PDC15 Expansion Setting Parameter
_Ex_Param
UINT Area of Expansion Operation Data
UINT First Word in Expansion Operation Data Area
UINT Input No. 1 Span Adjustment Position (Input span percentage)
INT Input No. 1 Zero Adjustment Position (Input span percentage)
UINT Input No. 1 Zero/Span Adjustment Period
UINT Input No. 1 Notice of Days Remaining
UINT Input No. 1 Top and Valley Detection Hysteresis
WORD Input No. 1 Integer Unit
UINT Input No. 2 Span Adjustment Position (Input span percentage)
INT Input No. 2 Zero Adjustment Position (Input span percentage)
UINT Input No. 2 Zero/Span Adjustment Period
UINT Input No. 2 Notice of Days Remaining
UINT Input No. 2 Top and Valley Detection Hysteresis
WORD Input No. 2 Integer Unit
1 Overview and Features
Item
1
1-29