H3C S6812 Series Installation Manual page 27

Figure2-23 Attaching the mounting brackets and chassis rails to the switch (power
module-side mounting position for the mounting brackets, super-short slide rails, chassis
rails not reaching out of the chassis)
Figure2-24 Attaching the mounting brackets and chassis rails to the switch (power
module-side mounting position for the mounting brackets, super-short slide rails, chassis
rails reaching out of the chassis)
NOTE:
Secure the mounting brackets and chassis rails to both sides of the chassis in the same way.
Attaching the long or super-short slide rails to the rack
The procedure is the same for attaching long and super-short slide rails to the rack. This section
uses the long slide rails as an example.
To attach the slide rails to the rack:
1. Identify the slide rail installation position in the rack.
2-20