Mounting The Switch On A Workbench - H3C S6812 Series Installation Manual

Figure2-35 Mounting the switch in the rack (port-side mounting position for the mounting
brackets)
Figure2-36 Mounting the switch in the rack (power module-side mounting position for the
mounting brackets)

Mounting the switch on a workbench

IMPORTANT:
• Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
• Avoid placing heavy objects on the switch.
To mount the switch on a workbench:
1. Verify that the workbench is sturdy and reliably grounded.
2. Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.
2-27