H3C S6812 Series Installation Manual page 19

Figure2-10 Attaching the front mounting brackets to the switch (power module-side
mounting position)
Mounting the switch in the rack
This task requires two people.
To mount the switch in the rack:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2. Verify that the front mounting brackets have been securely attached to the switch chassis. See
"Attaching the front mounting brackets to the
3. Attach cage nuts to the front rack posts.
4. One person supports the bottom of the switch, and moves the switch to an appropriate position
based on the installation positions of the front mounting brackets.
5. Another person uses M6 screws and cage nuts to attach the mounting brackets to the rack and
verifies that they are at the same level.
Figure2-11 Mounting the switch in the rack (port-side mounting position for the mounting
brackets)
chassis."
2-12