Jcmos-Clear Cmos Data Setting - JHCTech ALAD-A1001T User Manual

Jumpers
Jumper
JCMOS
USB_PWR1, USB_PWR2 USB1、USB2 power Select
AT_ATX
JC1
JLV

2.3.1 JCMOS-Clear CMOS data Setting

If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JCMOS pins 2 and 3 to On. Wait for a few seconds and set JMOS back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Clear CMOS Data Setting
Power on mode select
COM2 RS232/R485/R422 Mode Select
LVDS 12V/5V/3.3V power Select
Figure 2.6
9
Name
User's Manual
Description
3-Pin Block
3-Pin Block
3-Pin Block
3-Pin Block
6-Pin Block