Table of Contents
Advertisement
2.4.2 Power Input Connector (DC-IN)
The ALAD-A1001T uses a 4-pin MicroTCA, DC IN 9~24V.
2.4.3 USB Connector
The USB device allows data exchange between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals.
The ECM-I714 board is equipped with one USB 3.0 port (USB 1), three USB 2.0 ports (USB 2-3-4).
3 USB2.0 ports by type A connectors in the rear. Please refer to Table 2.4 for their pin assignments.
Table 2.1: RJ-45 Connector pin assignments
Pin
10/100/1000BaseT Signal Name
1
TX+(10/100), BI_DA+(GHz)
2
TX-(10/100), BI_DA-(GHz)
3
RX+(10/100), BI_DB+(GHz)
4
BI_DC+(GHz)
5
BI_DC-(GHz)
6
RX-(10/100), BI_DB-(GHz)
7
BI_DD+(GHz)
8
BI_DD-(GHz)
Figure 2.14 4-pin MicroTCA
Table 2.2: Power Connector Pin Assignments
Pin
Signal Name
1
+9~24V
2
+9~24V
3
GND
4
GND
14
User's Manual
Advertisement
Table of Contents
