Table of Contents
Advertisement
ITEM
Output
Connection
Select from C0 to C31 or disabled.
Following parameters are configurable when Cx is selected.
Register
Modbus/TCP
SLMP
SWAP
Select Enable / Disable.
Modubus/TCP
Eneble: small address is lower, large address is upper
Disable: small address is upper, large address is lower
SLMP
Differs between PLC and device. Set in necessary. Refer to 3.5 SLMP
DESCRIPTION
When the protocol of the specified Connection is set to
Modbus/TCP, set the output register. When the unit identifier
is set to variable, set the unit identification number.
When the protocol of the specified Connection is set to
SLMP, set the output device.
The display format for device address can be switched
between octal, decimal, and hexadecimal.
JC-IO USERS MANUAL EM-9044-B
24
Advertisement
Table of Contents
Need help?
Do you have a question about the JC-IO and is the answer not in the manual?
Questions and answers