Navigating The Display - Emerson Rosemount 1056 Quick Start Manual

Quick Start Guide
4

Navigating the display

4.1 User interface
The Rosemount 1056 has a large display which shows two live measurement
readouts in large digits and up to four additional process variables or
diagnostic parameters concurrently. The display is back-lit, and you can
customize the format to meet your requirements.
Press MENU to access calibration, hold (of current outputs), programming,
and display functions. In addition, a dedicated DIAGNOSTIC button is
available to provide access to useful operational information on installed
sensor(s) and any problematic conditions that might occur. The display
flashes Fault and/or Warning when these conditions occur. The transmitter
displays Help screens for most fault and warning conditions to guide you in
troubleshooting. During calibration and programming, key presses cause
different displays to appear. The displays are self-explanatory and guide you
step-by-step through the procedure.
4.2 Keypad
Press MENU to access menus for programming and calibrating the
transmitter. There are four function keys and four selection keys on the
keypad.
Function keys
Four top-level menu items appear when you press MENU.
• Calibrate: Calibrate the attached sensor(s) and analog output(s).
• Hold: Suspend analog output(s).
• Program: Program outputs, measurement, temperature, security, and
reset.
30
February 2022
Emerson.com/Rosemount