3
The following window is displayed.
4
Click Calibrate to begin touch screen calibration. The control PC will display the
following screen, which includes instructions to assist you in screen calibration
and shows a cross in the upper left corner.
5
Touch the cross in the upper left corner for two seconds with a finger, stylus, etc.
The Calibration Utility will record the relevant information and three other crosses
will appear in the corners of the screen. Touch each remaining cross for two
seconds as it appears.
6
Once the Calibration Utility has captured the positions of the pointers on the
screen, it will close down and the display is ready to operate in touch screen
mode.
EP Series Touch User Guide
Side
11