Tar River SRB-870 Instruction Manual page 42

Gate
Fault Possible cause
*Bale does not *Density too high density
come out *Too wide windrow
*Declined field
*Gate does not *Closing of stop valve
open *Leakage or breakage of hydraulic
circuit
*Wrong adjustment of locking hook
*Disengagement of PTO
*Insufficient of power package oil
PTO shaft
Fault Possible cause
*Abnormal *Insufficient Lubrication
*Too much sharp angle of PTO shaft
Remedy
*Adjustment in according with"3-2-
4Adjustment of bale density"
*Making windrow in accordance with "3-3-
1 Method of windrow making"
*Ejection of a bale in flat place
*Opening of stop valve
*Remedy in accordance with "2-2-2-1
Inspection of hydraulic system gate
opening and closing
*Adjustment in accordance with"5-2-6
Adjustment of bale density detection link
*Engage PTO and eject bale while PTO is
running.
*Application of oil in accordance with"2-3
Lubrication spots table"
Remedy
*Application grease to sliding pipes,
spiders and mounting part of safety
cover
*Adjustment of tractor top link length,
lower link stabilizer and lower link upper
limit.
42