Table of Contents
Advertisement
Normal operation speed is 3-5 km/hr.
Adjust the operation speed depending round on the field condition.
Caution in operation
•
Do not stop PTO while is binding round on a bale.
b. Quantity of baling material inside of the chamber can know from the indicator.
The indicator rod rises when a bale is coming to complete.
c. When a bale reaches to complete, buzzer sounds and twine binds on a bale automatically.
Caution in operation
•
If the twine binding will not start, forward about 1 m.
d. When twine binding is finished, twine is cut and binding stops.
Pull the rope of power package while PTO is running and open the gate and then eject a
bale.
Warning
•
Bystanders must be away from the machine when the gate is opened.
•
Do not eject a bale at inclined field.
Eject a bale always level field.
e. Return level of power package after bale ejection to close gate and then start the operation.
Baling Material
condition*
Moisture content
Standard
Dried* short
Moist*stuck pick up
PTO speed
540 rpm
350-450 rpm
540-600 rpm
29
Advertisement
Table of Contents
