Table of Contents
Advertisement
Adjust the machine in accordance with trouble shooting table if it does not work well.
Warning
•
Stop the tractor engine and disengage PTO when adjustment is done.
•
Lock gate by closing stop valve not to fall down inspection or adjustment is done.
Fault
*Abnormal noise is made
*Material is not picked up
cleanly
*Baling material is clogged
between pick-up and chamber
*Pick-up does not rotate.
Trouble Shooting
Possible cause
*Breakage of tine
*Breakage of rotor flush
*Winding of hay or twine
*Breakage of cam roller bearing
*Insufficient V belt tension
*Wrong pick-up setting
*Too fast traveling speed
*Breakage of tine
*Too fast PTO rotation
*Obstruction by side cover and
cover shield
*Too fast traveling speed
*Too wide and too high window
*Too much declined pick-up
*Wrong V belt tension
adjustment
*Breakage of V belt
*Too much clearance between
pick-up tines and ground
*Too wide and too high window
Remedy
*Tine replacement
*Rotor flush replacement
*Remove of winding material
*Replacement of cam roller
bearing
*Adjustment in accordance with
"5-2-2 adjustment of pick-up V
belt tension"
*Adjustment in accordance with
"3-2-1 adjustment pick-up
height from ground"
*Reduction of traveling speed
*Replacement tine with the new
one
*Adjustment PTO rotation in
accordance WITH "3-3-2 Field
operation"
*Taking outside cover and cover
shield
*Reduction of traveling speed
*Making window in accordance
with "3-3-2 Method of window
making"
*Shortening top link for
obtaining forward declined
machine position
*Adjustment in accordance with
"5-2-2 adjustment of tension for
pick-up"
*Replacement of broken V belt
with new one
37
Advertisement
Table of Contents
