Table of Contents
Advertisement
1st. Stop PTO of the tractor
2nd. Pull Down the lever and lock it by lock plate.
3rd. Switch off the buzzer
4th. Lift the machine by operating 3P lifting lever.
5th. Lock 3P of the tractor not to come down the machine in the transportation.
Maintain the machine for keeping long life.
Caution
•
Never try to remove blocked material when the machine is running.
Disengage clutch of PTO drive, stop tractor engine, and make sure all moveable parts stop.
(1) Maintenance after operation
1- Remove baling material from pick-up in the field.
2- Remove piled dust from the binding the binding unit.
3- Remove baling material stuck material on the rolls.
4- Removed dust from driving device in the side of the machine.
5- Replace damaged or worm parts to new ones.
6- Inspect diving and connection parts in accordance with inspection spots table.
7- Lubricate in accordance with lubrication spots table.
8- Apply grease on PTO shaft, PIC shaft, power joint and other parts which are not painted to
prevent from the rust.
9- When the machine and tractor separate, column should be set down.
10- After machine and tractor separate, PTO shaft should be detached.
(2) Detaching from tractor
1- Slid down stand and insert pin into the highest
2- Lower hydraulic control lever of a tractor until tires of the machine contact with the ground.
3- Stop the tractor engine and apply parking brake.
4- Detach power joint from the tractor PTO shaft.
5- Detach right side of lower link, left side of lower link and top link.
(3) Storage in out of season
1- Clean every part of the machine
2- In spent moving parts and connecting p0arts in accordance with inspection and maintenance
points table.
Transportation
Storage
30
Advertisement
Table of Contents
