Table of Contents
Advertisement
3. Method of Twine Threating
Warning
•
Stop the tractor engine when twine is treading.
Caution in Operation
•
Use only original twine TG0800 (Jute 8500 ft.)
•
TP0800 (Polypropylene 1100 ft.)
a. Contain two twine spools in the twine casting.
b. Connect the end of rope G.K not be made as small as possible.
c. Turn twine pulley to the direction of arrow until binding arm move from outside to side and
then stop turning at horizontal distance 150 mm between tip of binding arm and pivot.
d. Thread twine tip order from 1 to 9. Use attached twine threader places where it is
difficult thread twine. Cut the of twine by the length from 350 mm to 380 mm and hang
it from binding arm tip.
15
Advertisement
Table of Contents
