Simplex 4008-9101 Installation, Programming And Operating Instructions page 45

Editing Point Labels
1. Follow the steps in "Accessing Menus". Make sure to
choose IDNet as the type of device to program.
<ENTER>=Accept
Prg: [IDNet]
2. Press <ENTER>. The top line shows the custom label
assigned to the first IDNet point. Use the <NEXT> and
<PREV> keys to scroll through the list of points.
3. Press <ENTER> when the appropriate point is dis-
played. A prompt appears, asking you to specify the
function type. Use the <NEXT> and <PREV> keys to
scroll through the choices until <Edit Label> appears.
IDNet1
Fn: [Edit Label]
4. Press <ENTER>. A cursor appears beneath the leftmost
letter of the currently assigned custom label. Use the left
and right arrow keys to move the cursor between letters.
You can edit a label in one of three ways:
• Using the Keypad. Press the alphanumeric key cor-
responding to the letter you want. For example, for
the letter "C", press the "2" key on the keypad three
times. Use the left and right arrow keys to move to
the next letter in the label.
• Use the <NEXT> and <PREV> keys. Each time
you press the <NEXT> key, the display advances to
the next character. Likewise, each press of the
<PREV> key moves backward one character. Use
the left and right arrow keys to move to the next let-
ter in the label.
• Use the Word Library, which is a stored list of com-
mon words sorted alphabetically. Press the
<FUNCTION> key on the front panel. A prompt
similar to the following appears.
To jump to a word, press the alphanumeric key cor-
responding to the first letter in the word. For exam-
ple, to use the word Floor, press the "3" key
repeatedly until Floor appears.
Technical Manuals Online! - http://www.tech-man.com
IDNet1
<FUNC> = Word Library
firealarmresources.com
Chapter 4. Manually Programming IDNet Points
The following is a list of all words in the library.
Table 4-5 Word Library
Default of blanks 5th
North Flr_1
South Flr_2
East Flr_3
West Flr_4
Front Flr_5
Centr RM __
rear Basement
upper Boiler_RM
lower Classroom
main Closet__
first Corridor
2nd Elect_RM
3rd Elevator
4th Entrance
5. Pressing <ENTER> saves the current label. Pressing
<EXIT/CLEAR> will quit label editing without saving.
Clear Point Label
The "Clear Point Label" menu performs the same function as
"Edit Point Label" described above except that it clears the
point's currently assigned label first.
Alarm Group
The Alarm Group programming choice allows you to per-
form input-output (selective signaling) programming in a
fast, flexible manner. The Alarm Group concept allows the
activation of a particular input to control a specific set of
outputs. An IDC can be in up to three different Alarm
Groups. For additional details on Alarm Groups and their
operation, refer to "Programming Overview" in Chapter 1.
When the Alarm Group choice is selected the following
screen showing the point's custom label and the currently
assigned Alarm Groups is displayed:
IDNet:1
ALM GRP: [00] 00 00
4-7
Floor
Garage
Hallway
HVAC_Room
Kitchen
Lobby
Office
Patient
Restroom
Room
Stairway
Storeroom
Wing
Zone