Features Of Lcd-40 And Lcd-40L - Fire-Lite Alarms LCD-40 Series Manual

Remote fire annunciator for use with ms-9200(c)/e addressable fire alarm control panel

Hide thumbs Also See for LCD-40 Series:

Manual (20 pages)

Table Of Contents

Table of Contents

LCD-40 Series Annunciators

The LCD-40 Series is capable of displaying English-language text of

system point status including device type, independent point alarm,

trouble or supervisory, zone and custom alpha labels programmed into

the control panel. The LCD-40 Series also provide system status LEDs

to display Power, Alarm, Trouble and Supervisory conditions. The

LCD-40 is capable of performing system acknowledge, silence, drill

and reset remotely while the LCD-40L does not have these features.

Communication between the control panel and the LCD-40 Series is

accomplished over a two-wire serial interface employing the EIA-485

communication standard. Up to 32 annunciators may be connected to

the two-wire EIA-485 circuit. The annunciators may be powered from

the host FACP or remote UL listed, filtered, power supplies.

1.1

• 40-character LCD display (20 characters x 2 lines) is backlit

• System Status LEDs for Power (green), Alarm (red), Trouble

• No programming necessary — duplicates messages at control

• Local piezo sounder with alarm and trouble resound

• Device type identifiers from the control panel

• Device & zone custom alpha labels from the control panel

• Time/date and device address from the control panel

• EIA-485 connects to control panel terminal port (requires

• Plug-in terminal blocks for ease of installation and service

• DIP switches control piezo enable/disable and transmit/receive

• Up to 32 LCD-40 Series Annunciators per MS-9200

• Mounting options:

• Backlight turns off during AC loss to conserve battery power but

Technical Manuals Online! - http://www.tech-man.com