Table of Contents
Advertisement
Installing Option Modules
Insert the two stand-offs (provided) into the holes located on the right-side edge of the main board. Carefully
align the pins on the main board with J1 and/or J2 on the option board. Insert screws (provided) into the
holes on the top of the stand-offs. Affix the terminal identification labels provided with the option modules
as shown below.
(Part #42050)
Stand-offs
Option Board
Main
(4XZMF shown)
Board
Figure 3.6-2: Installing Option Modules
22
MS-4424 15153:F1 06/18/97
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
Advertisement
Table of Contents
