Optional Modules - Fire-Lite Alarms MS-4424 Manual

3.6

Optional Modules

The MS-4424 has two module connectors - J5 and J8. Three modules are available for the panel and they
can be used in any combination, including duplicate modules (see notes below). The corresponding option
jumper must be cut before installation of an optional module, to enable module supervision.
TB5
Notes:
1) Optional 4XLMF module for an RZA-4XF Annunciator must be installed on J7 and J8 only.
2) 4XTMF and 4XZMF modules can be installed in either location.
Technical Manuals Online! - http://www.tech-man.com
TB1
TB2
Figure 3.6-1: Optional Panel Modules
firealarmresources.com
TB3 TB4
JP1
MS-4424 15153:F1 06/18/97
Cut GEM ALM1,
GEN ALM2 and
SUPV1 jumpers
for Ring-by-Zone.
(see Section 3.4)
J4
J5
OPT1 Jumper
Cut to install module on J5.
OPT2 Jumper
Cut to install module on J8.
J7
J8
21