Effects On The Operator Interface - Simplex 4100 Operation

Version 9.X System Description,
Effects on the Operator
Interface
Continued
The Version 9.X TrueAlert modifications have the following effects on the
4100/4020 Operator Interface:
•
TrueAlert appliances are visible as points with custom labels. However,
appliances cannot be individually controlled and there is no "ON/OFF" status.
•
TrueAlert appliances only have trouble status associated with them.
•
TrueAlert channels are visible and behave in a similar fashion to MAPNET
channels in terms of status reporting.
•
Turning on all of the LEDs on a TrueAlert Controller is accomplished
through the TrueAlert appliance address.
•
VNACs are visible as signal circuits. They appear after the last conventional
signal circuit in the FACP.
•
VNACs only have on/off, disable, and manual override status associated
with them.
1-5
firealarmresources.com