PowerBox Systems PBR-12X Instruction Manual page 6

b) Capacity reset channel
This function can be used to select the channel which resets the consumed capa-
city; the default setting is channel 16. This channel resets the consumed capacity
when the travel exceeds 100%. You can use a switch or a button for this, and reset
the capacity value once the battery has been charged.
c) Failsafe
In this menu you can select an output which you wish to run to a particular servo
position if the radio signal should be lost. You should always assign this function
to throttle, as this is a legal requirement in many countries.
Select your preferred output, and set the Failsafe mode to Failsafe. Pressing the
Teach button accepts all the current servo positions for all outputs which are set to
Failsafe. RX1 must be bound to the transmitter when you make this setting.
6 PowerBox-Systems − World Leaders in RC Power Supply Systems