PowerBox Systems PBR-12X Instruction Manual page 2

Dear PowerBox Customer,
Congratulations on your decision to install a PowerBox PBR-12X in your model.
This unit represents the most compact power supply system available anywhere
at present.
The PBR-12X offers full telemetry capability in addition to its role as high-perfor-
mance power supply system with electronic switch.
We are confident that you will have great pleasure and success with your PBR-12X!
1.Installation, connections
In order to minimise the unit's dimensions, the case does not feature mounting
lugs; instead the PBR-12X is installed using the self-adhesive pad supplied in the
set. Since the unit is so light and compact, this represents an excellent method of
mounting.
The PBR-12X can be used with any of four radio control systems: PowerBox
CORE/ATOM P²BUS, Jeti EX-BUS, Spektrum SRXL2 and Futaba S.BUS2. All four
systems share a particular characteristic: servo-signals and telemetry data are
carried on a single bus cable. This eliminates the need for a second patch lead for
telemetry data, as is still required for other systems.
The PBR-12X automatically detects the system to which it is connected; it may
take a few seconds for the system to be recognised unambiguously the first time
it is plugged in. However, once detected, the type is saved, and the system starts
without delay next time it is switched on.
This means that the system is Plug'n Play, unless you wish to adjust the fail-safe
2 PowerBox-Systems − World Leaders in RC Power Supply Systems