Travis Industries 430 Mod-Fyre GSR2 Manual page 23

Co-Linear to Co-Axial Pipe
DuraVent manufactures a vent kit that adapts flexible co-linear venting to co-axial pipe. This can be
helpful for situations such as when a damaged masonry chimney top is removed to below the roofline or
when an additional story is added to a home and the added height covers the existing masonry chimney
height. The DuraVent kits (46DVA-CLTA and 46DVA-34CLTA) are approved for use with Travis
Industries gas inserts.
These kits can be purchased from your DuraVent dealer.
For inserts that use 3" exhaust and 3" intake
For inserts that use 4" exhaust and 3" intake
- Check with the local
Authority Having
Jurisdiction before
installing in this manner.
- The fireplace must be
permanently marked to
indicate that it has been
altered and no longer
suitable for burning solid
fuel (wood).
- All additional
requirements in the
manual for the installation
must be met.
- Refer to the vent
manufacturer's
instructions for further
details.
© Travis Industries
Finalizing the Installation
Application DuraVent Part #
46DVA-CLTA
46DVA-34CLTA
DuraVent Co-Linear
to Co-Axial Adapter
5/20/2021 - 1558
23
DuraVent Stock #
810014742
810014340
Max. 40'
(12.2M)
Min. 16'
(4.9M)
430 MF GSR2