Unpacking; Rack Mounting, Heat And Ventilation; Safety Notices - Solid State Logic THE BUS+ User Manual

Introduction

Unpacking

The unit has been carefully packed and inside the box you will find the following items.
➤ The Bus+
➤ IEC power cord for your country
➤ Safety Sheet
➤ Quickstart Guide
It is always a good idea to save the original box and packaging, just in case you ever need to send the unit in for service.

Rack Mounting, Heat and Ventilation

The Bus+ is a 2U, 19" rackmount piece of equipment designed to sit in the racking of a producer's desk or similar. It is recommended
that ventilation space is left above and below the unit so any heat generated by The Bus+ can naturally disperse. The sides of
The Bus+ chassis have cut-outs that should under no circumstances be blocked or covered. Always allow The Bus+ to cool down
before handling.

Safety Notices

Please read the safety notice information included on the Safety Sheet inside the box before using The Bus+. This information is
also available in Appendices section of this User Guide.
6
THE BUS+ User Guide