Table of Contents
Advertisement
Code-Break Master Game
How It Works
STEP 1 - Pick your colours
1.
At the start of each game, The Bus+ randomly picks (but does not show!) a sequence of colours
for the CH 1 IN, HF BELL, HF FAST and LF FAST switches. Each of these switches could be one
of a six possible colours - Orange, Red, Green, Blue, Magenta and White.
2.
Each round, you pick colours for each of these switches by toggling them to the ones you think
The Bus+ has picked. To change the combination of colours, simply press on any of the four
switches. A press and hold allows you to select the previous colour in the sequence.
3.
Finalise your decision for that round by pressing the MODE switch.
STEP 2 - Hint (See how you did)
After finalising your decision for the round, The Bus+ will feedback information on how close (or not!)
you were to guessing the correct colour combination, using the 4 LEDs above CLASSIC STEREO, �
S/C STEREO, DUAL MONO and MID SIDE:
Off LED = You have picked a colour which is not present in the
= You have picked a correct colour but it is in the wrong position.
Red LED
Green LED
= You have picked a correct colour AND it is in the correct position.
For example, 2 Red LEDs would mean you have correctly guessed the colour of 2 of the 4 switches
but they are both in the wrong position. Another example would be 1 Green LED and 3 Red LEDs,
meaning that one of the colours you have picked is correct (both for the colour and the position) and
the other 3 colours are correct but all in the wrong position. No LEDs lit means none of the colours you
have picked are present in the solution, in any position.
The image above shows what would be displayed if you had correctly guessed the colour and position of one switch (green)
Note: The position of the feedback LEDs is not related to the position of current guess.
STEP 3 - Use the Feedback to adjust the colours you pick in the next round
Press the left-hand side F/B switch to move onto your next round of guessing, once again toggling
the CH 1 IN, HF BELL, HF FAST and LF FAST switches to the colours you think The Bus+ has
picked as the secret code.
Again, finalise your choices for this round by pressing the MODE key.
26
26
and correctly guessed two other switches colours but in the wrong position.
solution.
Press the F/B switch to begin your next round of
Guess the colour
code The Bus+
has set for these
four switches
by toggling their
colours each round.
attempting to break the code.
THE BUS+ User Guide
THE BUS+ User Guide
Advertisement
Table of Contents
