Table of Contents
Advertisement
25
MERLIN STEALTH
Document Revision History
DOCUMENT REVISION HISTORY
Revision 1.0
19 September 2005
Revision 1.1
24 November 2005
Warning about safety switch added
Default energy reduced in HV mode for safety reasons during manufacturing.
Alarm threshold voltage made adjustable in HV mode.
Revision 1.2
29 November 2005
Wiring schematics added.
Revision 1.3
3 October 2006
Installation notes 18 and 19 added.
Revision 1.4
5 February 2007
Table of contents updated
High and Low Power typical readings added
Magnetic switch function added
Distance between wires of different fences changed to 2.5m
Revision 1.5
23 February 2007
Warning Head contact with fence added
Lid Alarm function added
Remote On/Off absolute or transition sensitive added
High Power Fence Voltage default changed to 0 (auto)
End of document
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MERLIN STEALTH and is the answer not in the manual?
Questions and answers
the gate 1 and gate 2 lights arent working Why
Gate 1 and Gate 2 lights may not be working on the Nemtek MERLIN STEALTH if there is an issue with the Master energizer, as Gates 1 and 2 are associated with the Master. Possible reasons include:
1. A tamper or service condition on the Master energizer.
2. Power supply issues to the energizer or gate circuits.
3. Faulty wiring or connections to the lights.
4. Incorrect keypad use—Master keypad should be used only on the Master unit.
Check the Master energizer status and connections for faults or tamper indicators.
This answer is automatically generated