Table of Contents
Advertisement
12
MERLIN STEALTH
Installer Options
LID ALARM FUNCTION
With the code 300# the energizer can be programmed to give a tamper alarm when the front lid
is removed while the energizer is operating. In default condition no alarm is given.
Once the function is programmed it is stored in memory and if the function is not required
anymore it can be programmed out with the same 300# code.
Check after programming that the function operates as required.
REMOTE ON/OFF ABSOLUTE OR TRANSISTION SENSITIVE
In the default condition the energizer will change its on/off state every time when the remote
on/off input is opened or closed.
The energizer can be programmed with the code 301# so that the energizer will always switch
on when the remote input is opened and always switch off when the input is closed.
Once programmed the function can be changed back in programming mode to the default
condition with the same 301# code.
Check after programming that the function operates as required.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MERLIN STEALTH and is the answer not in the manual?
Questions and answers
the gate 1 and gate 2 lights arent working Why
Gate 1 and Gate 2 lights may not be working on the Nemtek MERLIN STEALTH if there is an issue with the Master energizer, as Gates 1 and 2 are associated with the Master. Possible reasons include:
1. A tamper or service condition on the Master energizer.
2. Power supply issues to the energizer or gate circuits.
3. Faulty wiring or connections to the lights.
4. Incorrect keypad use—Master keypad should be used only on the Master unit.
Check the Master energizer status and connections for faults or tamper indicators.
This answer is automatically generated