Pvc Connection Status - Paradyne FrameSaver 9620 User Manual

Displaying System Information

PVC Connection Status

4-14
PVC connection statuses are selected from the Status menu. Only PVC
connections with Source DLCIs configured to be Active are shown.
Follow this menu sequence:
Main Menu Status
Field Status
— No PVC Connections.
Source Link, Network
Primary Destination Port-1
Link, and Port-2
Alternate Destination BRI
Link Mgmt Link name
Source DLCI, 16 to 1007
Primary Destination
DLCI, and
Alternate Destination
DLCI
Source EDLCI, 0 to 62
Primary Destination
EDLCI, and
Alternate Destination
EDLCI
1
Status Active
Inactive
1
If the alternate destination status is Active, BRI-B1 appears; if Inactive, BRI appears.
2
For the circuit to be active, both Network and Config Statuses must be Active.
August 1997
PVC Connection Status
What It Indicates
PVC connections have yet to be
defined.
Identifies the cross-connection of
DLCIs configured for the access
unit.
Network – DDS network
Port – Port-1 or Port-2
BRI – B channel 1
Mgmt Link – PVC is a
management link that terminates
in the access unit; name is set up
from Management PVCs Options
( Path: main/configuration/
management/pvc/entry).
Identifies the DLCI number for a
frame relay interface once the
source or destination link has been
selected.
For multiplexed DLCIs only.
Identifies an individual link/
connection embedded within a
DLCI.
2
Identifies whether the physical
interfaces, LMIs, and DLCIs are all
enabled and active for this PVC
connection.
9621-A2-GB20-30