Viewing Alarms And Leds Via The User Interface; Selecting Which Port's Status Is Shown By The Leds - Paradyne FrameSaver 9620 User Manual

Viewing Alarms and LEDs via the User Interface

Selecting which Port's Status is Shown by the LEDs

9621-A2-GB20-30
When Clear completes, Command Complete appears at the bottom of the
screen. If clearing a DLCI's statistics, Command Complete does not appear.
View alarm and status change messages on the following async terminal
interface.
System and Test Status screen following menu sequence:
Main Menu Status
Display LEDs screen following menu sequence:
Main Menu Status
Using the Control screen, you can assign which port's status appears on the front
panel's LEDs. There are 12 LEDs on the access unit's faceplate. See Chapter 5,
Maintenance and Troubleshooting
Procedure
To select which port's status appears on the LEDs:
1. Use the following menu sequence:
Main Menu Control
2. Select the port for which status will appear on the access unit's LEDs.
The port change is immediate; the Save function is not required.
Refer to the FrameSaver 9620 Technical Reference for more information about
Control functions.
August 1997
Displaying System Information
System and Test Status
Display LEDs
, to understand what they indicate.
Select LEDs
4-29