Pvc Connection Status - Paradyne 9120 User Manual

PVC Connection Status

9121-A2-GB20-00
PVC connection statuses are selected from the Status menu. Only PVC
connections with Source DLCIs configured to be Active are shown.
Follow this menu sequence:
Main Menu Status
Field Status
— No PVC Connections.
Source Link, Network
Primary Destination Port-1
Link, and Port-2
Alternate Destination BRI
Link Mgmt Link name
Source DLCI, 16 to 1007
Primary Destination
DLCI, and
Alternate Destination
DLCI
Source EDLCI, 0 to 62
Primary Destination
EDLCI, and
Alternate Destination
EDLCI
1
Status Active
Inactive
1
If the alternate destination status is Active, BRI-B1 or BRI-B2 appears; if Inactive,
BRI appears.
June 1997
Displaying System Information
PVC Connection Status
What It Indicates
PVC connections have yet to be
defined.
Identifies the cross-connection of
DLCIs configured for the access
unit.
Network –T1 network
Port – Port-1 or Port-2
BRI – B channel 1 or 2
Mgmt Link – PVC is a
management link that terminates
in the access unit; name is set up
from Management PVCs Options
( Path: main/configuration/
management/pvc/entry).
Identifies the DLCI number for a
frame relay interface once the
source or destination link has been
selected.
For multiplexed DLCIs only.
Identifies an individual link/
connection embedded within a
DLCI.
Identifies whether the virtual circuit
is active or inactive. It is a
combination of the physical layer
status (alarms or control leads), the
frame relay Link Status (enabled or
disabled), and the frame relay
network's specified status.
4-15