2
SETUP
Info
The markings on the handlebar should be at the center of the handlebar
clamps.
Keep the gap widths equal when tightening.
–
Position the handlebar cushion and secure with a cable binder.
201941-10
–
Remove screw
–
Position the start number plate. Mount and tighten screw
Guideline
Remaining screws, chassis
Info
Ensure the holding lugs engage in the fender.
–
Position the brake line and guide. Mount and tighten screw
201942-10
–
Connect the fuel line to the fuel tap.
L02365-01
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
800042-10
–
Take the vehicle off of the work stand.
–
Activate the hand brake lever numerous times until the brake linings rest against
the brake disc.
–
Activate the front brake and compress the fork a number of times forcefully to align
the fork legs.
–
Tighten screws
Guideline
Screw, fork stub
201944-10
–
Refuel. (
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
with the guide from the start number plate.
.
p. 7)
.
M6
10 Nm (7.4 lbf ft)
.
M8
15 Nm
(11.1 lbf ft)
4