Precautions - Pfeiffer Vacuum ASM 390 Additional Installation, Operation And Maintenance Instructions

General maintenance recommendations
● When you order spare parts, you must mention everything featured on the product rating plate.
● Comply with all safety and risk prevention instructions in accordance with local safety standards.
● Wait 5 minutes after powering off before working on the electrical components.
● Regularly check compliance with all precautionary measures.
● Do not switch on the product without the covers.
● Fill in the declaration of contamination form available on our website. Attach it to the product be-
● Use the original packaging to return the product to a Pfeiffer Vacuum service center: the manufac-
2.1.2 Precautions
Only qualified personnel trained in safety regulations (EMC, electrical safety, chemical pollution) are au-
thorized to carry out the installation and maintenance described in this manual. Our service centers can
provide the necessary training.
► Do not remove the blanked-off flange from the inlet port while the product is not in use.
► Do not expose any part of the human body to the vacuum.
► Follow the safety and accident prevention requirements.
► Regularly check compliance with all precautionary measures.
► Do not turn on the product if the cover is not in place.
► Do not move the product while it is in use (product powered on).
► Use the product's brakes to immobilize it during use (product powered on).
fore shipping to one of our Pfeiffer Vacuum service centers.
turer shall not be held liable for damage resulting from transport in unsuitable packaging.
Duty to provide information on potential dangers
The product holder or user is obliged to make all operating personnel aware of dangers
posed by this product.
Every person who is involved in the installation, operation or maintenance of the product
must read, understand and adhere to the safety-related parts of this document.
Obligation to provide personal protective equipment
The operators or employers are obliged to provide the user of the product with the neces-
sary personal protective equipment (PPE).
Persons responsible for installing, operating and repairing the product must wear PPE for
safety.
Infringement of conformity due to modifications to the product
The Declaration of Conformity from the manufacturer is no longer valid if the operator
changes the original product or installs additional equipment.
● Following the installation into a system, the operator is required to check and re-evalu-
ate the conformity of the overall system in the context of the relevant European Direc-
tives, before commissioning that system.
Installation and use of the accessories
The products can be fitted with special accessories.
The installation, use and refurbishment of the connected accessories are described in de-
tail in the respective operating instructions.
● Only use original accessories.
● Accessory part numbers (see chapter "Accessories").
Safety
9/34