Labels - Pfeiffer Vacuum ASM 390 Additional Installation, Operation And Maintenance Instructions

1 2 3
1
1.3.3 Labels
INPUTS/OUTPUTS
SERIAL
NETWORK
USB
1
FR AEOF 00165062 - assurance qualité / quality control
2
3
4
5
6
PRODUIT PERSONNALISE
CUSTOMIZED PRODUCT
7
8
9
HLD1302577 - RS232
Bluethooth MAC address
XXXXXX / None
Network MAC address
xx:xx:xx:xx:xx:xx / None
(Example)
Note
Tip
Check a key point on the graphic.
Apply the stated tightening torque.
Respect the chronological order of operations and/or assembly/disassembly direction.
2
Correct, right choice.
Incorrect, wrong choice.
This label guarantees to the user that the product packaging has not been
opened since leaving the factory.
This label indicates that some of the internal parts are electrically live and could
cause electrical shock in case of contact.
● Do not use the product if the main power supply cable is not earthed.
● Disconnect the main power supply cable from the product before servicing
the product.
This label indicates that some of the internal parts are electrically live and could
cause electrical shock in case of contact.
● Disconnect the main power supply cable from the product before removing
the cover.
This label indicates that the detector's exhaust should not be blocked.
This label indicates the grounding point on the product.
This label indicates that the product has been customized at the customer's re-
quest.
This label indicates that the product has been certified compliant with quality
control upon leaving the factory.
This label indicates that the product is subject to regulations for the treatment of
electrical and electronic equipment waste (refer to the EC declaration of con-
formity for the product).
This label indicates the MAC address for the options installed in the product.
Inputs/Outputs communication interface connector
9-pin D-Sub RS-232 serial link connector
Ethernet plug
USB plug
About this manual
5/34