Fan Maintenance - Pfeiffer Vacuum ASM 390 Additional Installation, Operation And Maintenance Instructions

Reassembly
4
3
F1 Filament 1
1
2
1. Place the new filament on its housing against both centering stops. Fix it with the screw and
2. Fit the fastening clips on the connectors on each side of the filament.
3. Reassemble the analyzer cell (see chapter "Disassembly/reassembly of the analyzer cell").
4. Update the replaced filament maintenance counter from the menu (see chapter "Information" of
5.7 Fan maintenance
Fixing screw and washer
Filament strip
The connectors are perpendicular to the supporting surface and parallel to each other.
washer provided with the filament.
the operating instructions).
F1
2
3 Connectors
4 Centering stops
Service - Maintenance
1
19/34